Electric shock, Injuries

Angle grinder

Angle grinderAngle grinderAngle grinder
Case number
0669/07
Category
Machinery
Type / Model
olsProduct: Angle grinderBrand: MANS FRIENDType/number of model: MF 125-110; Bar code: 9 120 022 491 561
Audience
Consumer
Notifying country
🇭🇺 Hungary
Country of origin
🇨🇳 China
Published
2007-07-13

⚠️ Risk

The product poses a serious risk of electric shock because:- live parts are accessible, - the ventilation holes got damaged during the required mechanical tests, therefore the live parts became accessible, - the internal wiring is not fixed therefore they can got damaged due to contacting moving parts,and of injuries since the majority of the safety instructions and general safety rules are missing from the instructions for use. The product does not comply with the Low Voltage Directive and the relevant European standard EN 50144.

Measures

Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market, recall from consumers and fine ordered by the authoritiesDate of entry into force: Unknown

The samples are identical with each other considering their construction and the used parts, but the packaging is different. The housing of the grinder also serves as a grip. It is made of black plastic; there is an orange plastic insert on it. The second grip is also plastic and can be screwed into one of the holes on the sides of the metal crank house. The machine can be operated by pushing forward the switch button, where it is locked. The lock is released when pressing it from the side, and thus the button gets automatically into switch-off position. The protecting shield is made of iron plate and can be fixed onto the crank house with a screw. Main parts of the device: mains plug (16A/250V FV-007+mark of manufacturer+VDE); mains cable (H05VV-F; 2x0,75mm2 YONKANG ZHIYING CABLE AND WIRE FACTORY; VDE); bipolar switch (ZRHL DQ FD2-5/2F 125V~60Hz 250V~60Hz 16(16)a 5E4); attached cutting disc "MANS FRIEND max.80m/s 125X22,2mm Upm/rpm/tpm max. 12200” + mark of direction of rotation. Technical specification: 230 V; 50 Hz; 750 W; Class II; 11000 RPM; diameter: 125 mm.