Electric shock

AC adaptor for wireless handset of mobile telephone

AC adaptor for wireless handset of mobile telephoneAC adaptor for wireless handset of mobile telephoneAC adaptor for wireless handset of mobile telephone
Číslo případu
1499/08
Kategorie
Electrical appliances and equipment
Typ / Model
appliancesProduct: AC adaptor for wireless handset of mobile telephoneBrand: Profset Pro10 (on the packaging)Type: HCR-EUR-D05-001 EAN: 6 430029 640101
Cílová skupina
Consumer
Notifikující země
🇫🇮 Finsko
Země původu
🇨🇳 Čína
Zveřejněno
2008-12-26

⚠️ Riziko

The product poses a risk of electric shock because: - there is insufficient isolation between the parts connected to the mains and the output circuit which can be touched via the output cable, - creepage distances in the mains transformer (QYD 080310T1) between the primary and the secondary windings are less than 4 mm / 5 mm; measure a minimum of 0.2 mm between the primary winding and the output of the secondary winding, - there are no insulation tubes on the output wires, - the mains transformer does not pass the electric strength test of 3000 V AC for 1min between the primary winding and the secondary winding, - flash-over occurs at 1250 V AC. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60950.

Opatření

Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Recall from consumers ordered by the authorities.Date of entry into force: Unknown

Plug-in type AC adaptor for wireless handset of mobile telephone. Handset operates with Bluetooth mobile phones with USB connector.